Toyota MR2 Spyder 2000 - 2006 Lambo Door Kit by Vertical Doors Inc 00-06 Scissor

Description

The listing is for a
Vertical Doors, Inc. Lambo Door Conversion Kit for Toyota MR2 2000 - 2006
Item:
US MADE AND PATENTED Bolt-on Lambo Door kit.
(unless otherwise stated in the body of the listing)
Make:
Toyota
Model:
MR2
Year:
2000 - 2006
Trim
ALL
Notes:
Direct "Bolt On" hinge kit / Mounts to Factory Bolt Pattern
Manufacturer:
Vertical Doors, Inc.
Shipping:
FREE SHIPPING TO LOWER 48 STATES ONLY; Shipping to Hawaii and Alaska will be an additional . International shipping is done through the eBay global shipping program only. Contact us if you have any questions on shipping charges outside of the lower 48 states.
Items are Built to Order and will be shipped out 3-7 business days after the payment has been received. It will take an additional 1-5 business days in transit with the shipping carrier. Any shipments going outside of the lower 48 states will take longer to reach their destination.
This kit will fit:
Toyota MR2 2000
Toyota MR2 2001
Toyota MR2 2002
Toyota MR2 2003
Toyota MR2 2004
Toyota MR2 2005
Toyota MR2 2006
When placing your order please make sure to include:
* Make
* Model (2 door or 4 door)
* Exact Year
* Any modifications to the body and/or the door
* Telephone number where the shipping company can contact you..(just in case)
This system is everything you need for a successful, reliable and cost effective conversion in a minimum amount of time.
The Kit includes
Front Driver and Passenger Side Direct Bolt-on Lambo Door Hinges
2 X Heavy Duty German made Gas shocks (Pressurized for your specific automobile)
Hardware Kit (Nuts and Bolts)
Detailed Installation Instruction
The kit Features:
Heavy duty constructions
Easy installation
Fully reversible
(most cars)
Heavy Duty German made shocks (Beware of other sellers using low quality shocks)
Direct bolt on construction
Made by Vertical Doors, Inc.
With a Vertical Doors, Inc., kit, your ride will keep its factory look and feel while you are driving but the moment you stop and raised your doors you will experience a whole new level of attention that no other upgrade can give you. Vertical Doors, Inc., kits are proudly made and patented in the United States and are bolt-on kits made specifically for your particular vehicle. They only manufacture the best kits, best quality, strongest kits, and most affordable kit for the quality. Our line-up includes all the major vehicle manufactures.
Not only are our kit easy to install but they are also easy to operate, basically open your door like normal until it stops, at a predetermined position and then just raised your door up until it stops. You also have the option of not raising the door since unlike most Lambo Doors, Scissor Doors, Wing Doors, Butterfly Doors, Lamborghini Doors, etc, imitators; our Vertical Doors, Inc., kits will allow you to get in and out without having to raise your doors.
Vertical Doors are also known as Lambo Doors, Lambo Door Kits, Lambo Doors Conversion Kits, Lambo Door Hinges, Lambo Style Hinge Kits, LSD, VDC, VDI, VDC Kits, VLS, Upright Doors, Scissor Doors, Wing Doors, Butterfly Doors, Lamborghini Doors, or Evo Doors
We have 100's of kits in stock that will fit most of the major automobile manufacturers.
This Vertical Doors, Inc is covered under following U.S.A patents #7,941,897; #7,552,514; #6,808,223; #6,845,547; #7,140,075; #7,059,655 and other patents pending.
We carry the full line of Direct "Bolt-on" Vertical Lambo Door conversion kits from “Vertical Doors, Inc.” and “Bolt-on Lambo Doors” we also carry "Weld-on" universal kits
MAKE SURE YOU ASK THESE QUESTIONS BEFORE YOU PURCHASE ANY LAMBO DOOR KIT!
1. IS IT A DIRECT BOLT-ON?
(Weld-on kits may damage your vehicle and they are NOT vehicle specific)
2. DOES THIS KIT BOLT DIRECTLY TO THE FACTORY HINGE HOLES ON MY VEHICLE?
(If they say “NO”, the installation will be difficult and/or expensive)
3. DOES THIS LAMBO DOOR KIT COME COMPLETE WITH HARDWARE, SHOCKS AND DIRECTIONS?
Some sellers will mislead you and say “Weld-on” installation is easy and that their universal style kits are made for your particular vehicle.)
4. CAN YOU ACTUALLY TALK TO A SELLER?
(With other manufactures, many times you will get no support after the sale)
Please use the "contact seller" option if you have any questions.
WE ARE HERE MONDAY - FRIDAY 8AM TO 5PM PACIFIC STANDARD TIME.
HERE ARE A COUPLE OF TECH TIPS
• Do not take Door off during installation Please follow the detailed instruction manual step by step
• Use 2" painters’ tape to mark the factory location of your door on the horizontal and vertical plane also measure the distance between the apron and the front edge of the door by the bottom and top hinge.
• Make sure the mounting surface is flat as possible, if anything is there, grind the surface so the vertical door kit can sit and mount flat.
• Make sure both allen screw adjustment on each system are adjusted accordingly.
• The kit requires no modification, the kit is a bolt on, but most inner fenders must be rolled or trimmed. Make sure to trim a tittle at a time, you only need to trim enough to allow the swing arm to open and move up and down
• If you have any questions during the install PLEASE CALL US.
Shock Maintenance - IMPORTANT STEP - Do not skip this step!
This step is crucial in your installation process, if this step is not completed when installing your vertical door kit; all warranties are voided and may cause future problems with your vehicle.
Make sure you put grease on the body of the shoulder bold where arrow is pointing.
Make sure you use RED Loctite where the arrow is pointing, on the tread of the shoulder bolt.
Make sure you put grease on the bottom side of the shock end.
It is recommended that every 3 - 6 months all parts of hinge be sprayed with lubricant to ensure smooth hinge operation.
Warning the use of any pliers, paint or foreign materials on shocks body or shaft will Void the Warranty.
Use No Pliers
PAYMENTS: We accept payments through PayPal.
International orders must have a verified shipping address.
SHIPPING: Orders are typically shipped to destinations within (5-7) business day after receipt of payment. PLEASE ALLOW 1-5 DAYS FOR TRANSIT TIME. Your order is custom packed for its protection. Shipping insurance is included. For faster delivery on shipments to Hawaii, Alaska, or Canada, please requests an updated quote prior to submitting payment. We sell products directly from the manufacture, and in the rare case an item is on backorder, our purchasing power enables us to be first in line. You will be promptly notified if an item is in back order and given an e.t.a. for arrival. UPS tracking information will be posted on the listing when it becomes available. Note: UPS cannot deliver to PO boxes. Canadian buyers may incur an additional brokerage fee that we have no control over. Orders are not shipped on weekends or holidays.
RETURNS:
Returns are for Store Credit only.
All E-Bay sales are final unless otherwise posted. Damaged merchandise must be reported to us with-in 48 Hrs. of receiving the item. Failure to report damaged merchandise will result in the loss of your shipping insurance coverage and the item will be unable to be returned.
If your item is damaged in shipping you must contact us right away so that we can contact UPS/FedEx to file a claim. UPS/FedEx will not allow us to file a claim without being able to pick up and inspect the item, make sure that the item and packaging can be picked up by UPS/FedEx for evaluation.
Inspect your package and its completeness right away. If you are missing any components from your package, you need to contact us within 72 Hrs. All of our products are cover by manufacturer’s warranty, unless the item is used or being liquidated.
A request for a return must be submitted and approved before shipment and clearly displayed upon outside of package. A return authorization number can be requested by contacting us via eBay. Requests must include part number, invoice number, and description of the issue. Only defective products can be returned. The issuance of an RA Number does NOT guarantee credit will be issued. All returns must be shipped at the buyer’s expense, COD shipments will be refused. Any return without proper RA number displayed on packaging will be refused at shipper’s expense. NON-Defective returns are subject to a 25% restocking fee at our discretion.
We do not guarantee proper fit of the product if the vehicle has been modified. Please forward your vehicle description (Year, Make, & Model) prior to closing order so we can make sure the product will in fact fit your specific vehicle.
Thanks for looking!